Trail Gear 301454-1 Ring And Pinion, Super Finished 5.29 High Pinion
542-301454-1
Trail-Gear 301454-1 Features:
Tired of waiting for your ring and pinions to break-in before towing or hitting the trail? Trail-Gear has your solution with our new Trail-Creeper Super Finish Ring & Pinion Gears. Our Trail-Creeper Super Finish Ring & Pinion Gears require absolutely no break-in time. You can install these gears and get right into the action without the need to worry about premature ring and pinion failure.
Trail-Creeper Super Finish Ring & Pinion Gears are made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.The gear teeth are cut using Gleason CNC hobbing machines & cutters.Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.
Key Benefits:
- No break-in period
- Less friction
- Reduced wear allowing bearings and gears to last longer
Trail-Creeper Super Finish Ring & Pinion Gears are treated with REM® Isotropic Super Finishing (ISF®) process. The process that is used to polish our gears is the same used for aerospace applications. The REM® Isotropic Super Finishing (ISF ®) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra! This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer.
The REM® Isotropic Super Finishing (ISF) process not only decreases friction and wear in the gears, but it creates a non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements.
- Made from tool-grade 8620 steel
- Heat-treated for maximum strength and wear resistance.
- Gear teeth are cut using Gleason CNC hobbing machines and cutters
- No break-in period
- Less friction
- Reduced wear allowing bearings and gears to last longer
- Treated with REM® Isotropic Super Finishing (ISF®) process
- The REM® Isotropic Super Finishing (ISF ®) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra! This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer
- Non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements
- For Toyota 8" solid axles only. Will not fit 7.5" IFS front axles.
Fits:
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.