Speedmaster PCE281.2146 Cast Aluminum Cylinder Head for Small Block Mopar 318/340/360, w/Hydraulic Flat Tappet Cam
746-PCE281.2146
Product Q&A
View Now
| Ratings |
|---|
| Price |
| Brand |
Small Block Mopar - Assembled
Speedmaster PCE 281.2146 Features:
- Combustion Chamber Volume (cc): 65 cc
- CNC-Machined Combustion Chamber: No
- Intake Runner Volume (cc): 170 cc
- Intake Port Shape: Rectangular
- Intake Port Location: Standard
- Exhaust Port Shape: OEM
- Intake Valves Included: Yes
- Intake Valve Diameter (in): 2.02 in.
- Exhaust Valves Included: Yes
- Exhaust Valve Diameter (in): 1.620 in.
- Valve Springs Included: Yes
- Maximum Valve Lift (in): 0.600 in.
- Outside Diameter of Outer Spring (in): 1.250 in.
- Damper Spring Included: Yes
- Number of Springs Per Valve: Dual
- Retainers Included: Yes
- Retainer Material: Chromoly
- Steel Locks Included: Yes
- Lock Style: 10 degree
- Valve Stem Seals Included: Yes
- Valve Stem Seal Style: Positive stop
- Rocker Arm Studs Included: No
- Rocker Arms Included: No
- Rocker Arm Nuts Included: No
- Guideplates Included: No
- Valve Cover Mounting Style: Center & Perimeter Bolt
- Accessory Bolt Holes Drilled: Yes
- Intake Valve Angle: 18 deg.
- Exhaust Valve Angle: 18 deg.
- Valve Guides Included: Yes
- Valve Guide Material: Bronze
- Valve Seats Machined: Yes
- Valve Seat Machine Style: 3-angle
- Valve Seat Material: Ductile iron
- Steam Holes Drilled: No
- Oiling Style: Through pushrod
- Machined for O-Ring: No
- Heat Crossover: No
Notes:
- RC12YC is the recommended spark plug style for use
- Due to the raised (+.625 in.) exhaust port location, +.100 in. longer bolts/studs are needed next to each port
FAQ:
Are aluminum cylinder heads better?
- Yes, aluminum cylinder heads offer improved heat dissipation and lighter weight, enhancing overall engine performance. Speedmaster PCE281.2146 aluminum heads are a great choice for improved efficiency.
Where are Speedmaster cylinder heads made?
- Speedmaster cylinder heads are manufactured with precision. The PCE281.2146, including Mopar aluminum heads, is crafted to high standards, ensuring quality and performance. Check product details for specific manufacturing locations.
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Specifications:
In the notes:: Due to the raised (+.625 in.) exhaust port location, +.100 in. longer bolts/studs are needed next to each port... Will this change the position of long tube headers, which are already a tight fit below the starter??
I have a 72 340 with a positive piston deck height, will there be any interference problems?,do I need a specific head gasket? Thanks
Will these heads increase the compression ratio and performance?
are these heads for small block chrysler closed chamber or opin chamber
Shaft oil system or threw pushrods I have a 1970 340
Do I need a diffrent length push rod with these heads
Above in the description it says set of 2. Does that mean the $1,165.00 is per pair of heads or is that price per head
Where are they manufactured?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.