RUNSWITCH+ Features:
- Provides a switched 12 V output for running vehicle accessories
- Eliminates splicing into OEM wiring
- Engine on/off auto-detect
- Internal fuse LED's illuminate for quick and easy setup, functional circuit confirmation, and diagnostics
- Compact sizing allows for various mounting options
- Reverse bias protection - fuse will open if Vin and GND are reversed
- The Timer Mode is adjustable from 1 to 90 minutes and enables the accessory output to remain on after the engine is turned off (pre-set at 3 minutes factory default)
- The Battery Saver Mode automatically monitors the battery charge level and will turn the output off if the battery level falls below the predetermined safe voltage level (approximately 11.5 V DC)
Technical Specifications:
- Engine Running Detection: Battery voltage increases/alternator charging
- Engine Off Detection: Battery voltage decreases/alternator not charging
- Sleep Detection: Engine off/Module off, no power output
- Wire Size: 20 AWG Stranded 105C
- Input Voltage: 12-16 V DC (Standard Automotive Battery)
- Input Current Fuse: 7.5 Max Amperage
- Output Voltage: 3.6 V typical (standard automotive battery power with the engine running)
- Output Current: 100 W / 7.5 Amp max current with engine running (fuse-protected)
- Sleep Current: 0 V output, 180 uA quiescent current (Vin < 12.8 V / Key = Off, Engine Off)
- IP54 Rated
- Operating Temperature: -40-degree F to 185-degree F (-40 C to +85 C, USCAR Interior / Below IP)
- Storage: -40-degree F to 257-degree F (-40 C to +125 C)
Note:
- When more than 7.5 amps are needed, the Run Switch can trigger multiple relays
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.