Nitrous Outlet 12-11500-S1 Features:
- Harness Routing Instructions
- Detailed Colored Wiring Diagram
- Deutsch Connectors
- High Quality Molex Terminals
- Covered Fuse Box with LED Illumination
- Bueler 40/60 Amp Relays
- Protective Expandable Wiring Loom
- Automotive Copper Core Wire with Protective Silicone Coating
- Operation Components:
- Single Stage Nitrous System, Transbrake Interrupt, Purge Kit, Bottle Heater, Heater Pressure Switch, Fuel Pressure Safety Switch, Timing Output, & WinMax Nitrous Controller
- Harness Components:
- Harness Routing Instructions
- Detailed Colored Wiring Diagram
- Deutsch Connectors
- High Quality Molex Terminals
- Covered Fuse Box with LED Illumination
- Bueler 40/60 Amp Relays
- Protective Expandable Wiring Loom
- Automotive Copper Core Wire with Protective Silicone Coating
- The Nitrous Outlet Universal DIY professional wiring harness is designed to work in conjunction with the Nitrous Outlet WinMax controller and is the perfect option to simplifying the wiring process associated with nitrous installations
- The most time consuming and complicated part of the wiring process is eliminated with the detailed instructions, colored wiring schematics, pin out sheet, and universally mounted pre wired relay pack with fuse panel
- The Harness is separated into three groups for ease of routing to the Engine bay components, interior dash components, and bottle location components
- Installation requires 7 easy steps
- Step 1: Determine location and mount the Relay pack and fuse panel
- Step 2: Mount the Switch Panel
- Step 3: Route the wiring to the system components
- Step 4: Cover the wire with the protective expandable wiring loom
- Step 5: Cut the wire to length
- Step 6: Terminate the wiring ends and connect to the system components
- Step 7: Connect Harness Power, Ground, Keyed hot, tach signal, and TPS signal or WOT switch.
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.