Meziere 100 Series Electric Water Pump Small Block Ford / AMC
680-WP111SHD
Product Q&A
View Now
Items You Need
Ford - Small Block
(Also Fits AMC 360-401ci Engines)
This is the most common pump body for small block Ford engines. It will bolt up to front covers from the early 1964 style through 1993 and slightly beyond. It has been used as the heart of many cooling systems and can be coupled with one of several different back plates to complete your system right. 1'' NPT inlet required.
Ford Engine Back Plate Requirements:
- WP112 - Early 221-289ci
- WP113 - Traditional 289ci/5.0L
- WP123 - Cleveland
AMC Engine Back Plate Requirements: - WP127 - 360-401ci
Features: - Fits small block Ford Windsor, Cleveland, and 5.0 models before 1994
- Suitable for street or drag strip use - 3000+ hour life expectancy
- Show quality finish
- Heavy duty motor provides 42 gallons per minute free flow rating
- All stainless steel hardware included
- Lightweight, Complete standard small block Ford unit weighs only 5.7 pounds!
- Stainless steel large diameter main shaft with high performance ceramic seal
- The pump will clear cam belt drives and most blower drives
- 1'' NPT inlet adapters are available for #12AN, #16AN, #20AN, 1-1/4'', 1-1/2'' or 1-3/4'' slip hose
Technical Specifications: - Belt Drives: If you are running a Yates, Danny B, Jesel, or Race Master cam belt drive on your small block Ford, you will need to use pump part number 680-WP173SHD
- Distributor Belt Drives: Spacers will be necessary to clear belt drive distributor systems.
- Finishing The System: This pump is supplied complete with gaskets and hardware but without the inlet fitting and optional back plate. The fitting needs to be ordered according to the size of the lower radiator hose. A back plate will be required in all applications using a stock-style timing cover.
- Amperage draw: Under normal use, the pump will draw 6-7 amps.
- Overall Height Dimension: The heavy-duty pump is 6.60'' long from the mounting surface to the tip of the pump.
- Pump Weight: This application weighs 5.7 lbs.
Additional Notes: The standard 42GPM pump is suitable for normally aspirated engines up to 650HP. Supercharged, turbocharged, and high compression, high horsepower applications should use the 55GPM High Flow pump only. This model does not accept heaters or bypass hoses as a standard.
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.