MSD Ignition Red Blaster 2 Coil For Points, Electronic or MSD Ignitions
121-8203





Items You Need
Ratings |
---|
Price |
Brand |
-
Details
Blaster 2
This Blaster 2 Coil is supplied with a 0.8 ohm ballast resistor and a terminal and boot to fit most applications. The ballast resistor must be used with stock Points Ignition and Mallory Unilite applications.Coil Specs:- Turns ratio: 100:1
- Primary resistance: .7 OHMs
- Secondary resistance: 4.5K OHMs
- Inductance: 8 mH
- Maximum voltage: 45,000 Volts (Tested with 6AL Ignition)
- Peak current: 140 mA
- Spark duration: 350 uSFeatures:
- Improved output coil for electronic, Point, Blaster or MSD 5, 6, and 7 Series Ignitions (ballast resistor required for points)
- Alkyd tower with high dielectric properties is less prone to carbon tracking
- 100:1 turns ratio and lower primary resistance produce high voltage output
- Metal canister is filled with a premium grade oil for cooling
- Supplied with two spark plug wire boots, terminals and a ballast resistor (required if used with stock points ignition)
- 50 State Legal
- CARB Legal for OBDII 2003 or Older E.O. D-40-37
- Improved output coil for stock points or electronic ignitions, Blaster Ignition or MSD 5, 6, and 7 Series
- Supplied with two spark plug wire boots, terminals and a ballast resistor (required if used with stock points ignition)
- 100:1 turns ratio and lower primary resistance produce high voltage output
- MSD Red metal canister is filled with a premium grade oil for cooling
- CARB E.O. Approved
Specifications:
Part TypeProduct LineBallast Resistor IncludedYesCARB EO NumberD-40-37 (pdf)Coil ColorRedCoil Internal ConstructionOil-filledCoil ShapeRoundCoil StyleCanisterCoil Wire AttachmentFemale/SocketCoil Wire IncludedNoDiameter2.125 in (53.975 mm)Height6 in (152.4 mm)Inductance8.0 mHMaximum Voltage45,000 VMounting Bracket IncludedNoPackage Depth2.60Package Height6.70Package Width3.80Part CategoryPerformance PartsPart FitmentSemi UniversalPeak Current140 mAPrimary Resistance0.700 ohmsQuantitySold individuallySecondary Resistance4.70K ohmsShipping Weight2.05Spark Duration350 uSTurns Ratio100:1Vendor Part Number8203 - Overview
-
Vehicle Fitment
- Instructions
-
Reviews8203 is rated out of 5 by 2.
-
Q & A
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.