JEGS Rear Tubular Trailing Arms for 1960-1972 GM C10 2WD Truck
555-64064
Rear Trailing Arms
JEGS 555-64064 Rear Tubular Trailing Arms
Upgrade your 1960-1972 GM C10 2WD Truck's rear suspension with a set of tubular trailing arms from JEGS. These robust units are constructed from rigid DOM tubing offering a substantially stronger alternative to the factory units. The poly bushings will stiffen your handling and remove the floating feeling from rubber bushings. Don't let worn trailing arms ruin the ride of your truck.
JEGS 555-64064 Rear Tubular Trailing Arms Features:
- Easily installed
- Powder-coated finish offers increased durability and reduced risk of rust
JEGS 555-64064 Rear Tubular Trailing Arms Note:
- These trailing arms are for Chevy & GMC Half-Ton 2WD C10 Trucks only.
FAQ
What is the most desirable year C10?
- The 1972 C10 is often considered the most desirable, boasting a classic design and robust performance.
What is the difference between a 1971 and 1972 Chevy truck?
- The main differences lie in design tweaks and engine options. The 1972 model is favored for its refined features.
How much did a 1972 C10 cost new?
- The 1972 C10 had a new price tag that varied, but the base price generally started around $2,800 (USD).
What is the difference between C10 and c20 rear suspension?
- The C10 (1/2 ton 2WD) uses a coil spring rear suspension with trailing arms, and the C20 (3/4 ton 2WD) uses a leaf spring rear suspension.
Specifications:
Are the U-bolt holes sealed somehow or are they an open design? My concern is that water will get in and then get trapped in the lower portion of the trailing arm, facilitating rusting.
Are these for long whell base or short wheel base trucks
What size U-bolts are used with trailing arms? 4 1/4" ?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.