Items You Need
950 CFM
Base Dimensions for Holley 0-80496-2
Features:
- Includes notched floats and (2) jet extensions
- 4150 square-bore flange bolt pattern
- Contoured venturi inlet for balanced airflow and reduced turbulence
- Screw-in air bleeds for precise tuning
- Dual 30cc accelerator pumps provide added fuel under initial acceleration to prevent starvation
- High-flow metering blocks with race-only fuel curve calibration
- Dominator-style fuel bowls for plumbing lines on either side of the carburetor
- 4-corner idle for idle system control
- Progressive Secondaries for dialed-in starting line launches
- Power valve blowout protection
- Stainless steel throttle plates add strength and corrosion-resistance
- 100-percent wet-flow tested to be ready-to-race right out of the box
Technical Specifications:
- Primary main jet: 79
- Primary power valve: 6.5
- Primary pump nozzle size: 31
- Secondary main jet: 79
- Secondary power valve: 6.5
- Secondary pump nozzle size: 31
- Throttle bore: 1.750 in.
- Venturi size: 1.376 in.
- Down leg booster
- 2-Circuit
Notes:
- Replaces Holley, Edelbrock, Carter AFB, and Autolite-style carburetors with 5 3/16 (.1875) in. x 5 5/8 (.625) in. bolt pattern
- An adapter is required to install on a spread bore-style intake manifold (sold separately) - recommend using Mr. Gasket Adapter Kit 720-1932
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.