$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

19421057 E-ROD LS3 6.2L Connect & Cruise Powertrain System with Supermatic 6L80-E Automatic Transmission
Product Discontinued
CHEVROLET PERFORMANCEPART NUMBER: 809-19421057K2

19421057 E-ROD LS3 6.2L Connect & Cruise Powertrain System with Supermatic 6L80-E Automatic Transmission

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

Items You Need

Penetrating Oil [11 oz. Aerosol Can]

LUCAS OIL

Penetrating Oil [11 oz. Aerosol Can]

Part Number : 639-11043
$878$9.49
You Save$0.71
GM LS Flexplate For All LS Series Engines with 6 Bolt Crank

JEGS

GM LS Flexplate For All LS Series Engines with 6 Bolt Crank

Part Number : 555-601060
$4699$50.99
You Save$4.00
Funnel [8.5 in. Overall Length]

JEGS

Funnel [8.5 in. Overall Length]

Part Number : 555-W4064
$599$6.99
You Save$1.00
LS Engine Swap Motor-Mount Adapters Billet Aluminum [Adapts Chevy Motor-Mounts to LS-Series Engine]

JEGS

LS Engine Swap Motor-Mount Adapters Billet Aluminum [Adapts Chevy Motor-Mounts to LS-Series Engine]

Part Number : 555-50538
$3699$43.99
You Save$7.00

Connect and Cruise Kits
E-ROD Connect & Cruise Powertrain System
  • GM LS3 6.2L Engine
  • 430 HP @ 5,900 RPM
  • 424 ft.-lbs. TQ @ 4,600 RPM
  • SuperMatic 6L80-E Six-Speed Automatic Transmission
  • 2,400-2,800 RPM Stall Torque Converter

    Breakdown of Included Items

    Chevrolet Performance 19421057K2 E-ROD LS3 6.2L Connect & Cruise Powertrain System with Supermatic 6L80-E Automatic Transmission Features:

    • Engine Type: LS-Series Gen IV Small-Block V-8
    • Displacement: 376 ci (6.2L)
    • Bore x Stroke: 4.065 x 3.622 in. (103.250 x 92 mm)
    • Block: Cast aluminum with six-bolt, cross-bolted main caps
    • Crankshaft: Nodular iron
    • Connecting Rods: Powdered metal
    • Pistons: Hypereutectic aluminum
    • Camshaft Type: Hydraulic roller
    • Valve Lift: .551 in. intake / .522 in. exhaust
    • Camshaft Duration (@.050 in.): 204-degree intake / 211-degree exhaust
    • Cylinder Heads: L92 style port; 'as cast' with 68-cc chambers
    • Valve Size: 2.165 in. intake / 1.590 in. exhaust
    • Compression Ratio: 10.71
    • Rocker Arms: Investment-cast, roller trunnion
    • Rocker Arm Ratio: 1.7:1
    • Recommended Fuel: 92 octane
    • Maximum Recommended rpm: 6600
    • Reluctor Wheel: 58X
    • Balanced: Internal

    6L80-E SuperMatic Features:

    • Six-Speed Automatic
    • 2400-2800 Stall Converter
    • Truck-Style Production Oil Pan
    • Production Vent Tube Assembly
    • 32-Bit Transmission Controller with street & track calibrations
    • Transmission Bulkhead Connector
    • -6 AN line fittings

    6L80-E SuperMatic Gear Ratios:

    • 1st: 4.02:1
    • 2nd: 2.36:1
    • 3rd: 1.53:1
    • 4th: 1.15:1
    • 5th 0.85:1
    • 6th 0.67:1
      
      

    Chevrolet Performance 19421057K2 E-ROD LS3 6.2L Connect & Cruise Powertrain System with Supermatic 6L80-E Automatic Transmission INSTALLATION NOTES:

    • Assembly does not include an accessory drive kit
    • LS3 is the same size and mounts the same as other LS-Series engines
    • Intended for pre-1976 street vehicles or any off-road vehicle
    • Transmission requires DEXRON VI fluid
    • 6L80 does NOT include a transmission dipstick
    • The specially calibrated engine controller does not engage a number of features associated with production-model systems, which eliminates the possibility of trouble codes. It also has an SES (service engine soon) LED indicator embedded in the fuse box.
    • Includes a mid wet sump oil pan installed. This oil pan will ONLY fit 2010-2015 Camaro SS/ZL1, 2012-2017 Caprice PPV, 2014-2017 Chevy SS, 2008-2009 Pontiac G8 chassis. THIS INSTALLED OIL PAN WILL NOT WORK WITH MUSCLE CAR LS ENGINE SWAPS. OIL PAN CHANGE IS REQUIRED FOR MUSCLE CAR LS ENGINE SWAPS.

    Engine Break-In Procedure

    Use only engine oil that meets dexos1 specifications. For track events or competitive driving, use Mobil 1 15W-50 engine oil. Fill the engine with oil and follow the proper engine priming procedure.  Also check and fill as required any other necessary fluids such as coolant, power steering fluid, etc.

    Start the engine and listen for any unusual noises. If no unusual noises are noted, run the engine at approximately 1000 RPM until normal operating temperature is reached.  The engine should be driven at varying loads and conditions for the first 30 miles or one hour without wide open throttle (WOT) or sustained high RPM accelerations.  Run five or six medium throttle (50%) accelerations to about 4000 RPM and back to idle (0% throttle) in gear. Run two or three hard throttle (WOT 100%) accelerations to about 4000 RPM and back to idle (0% throttle) in gear. 

    Change the engine oil and filter. Inspect the oil and the oil filter for any foreign particles to ensure that the engine is functioning properly.  Drive the next 500 miles (12 to 15 engine hours) under normal conditions. Do not run the engine at its maximum rated engine speed. Also, do not expose the engine to extended periods of high load.  Change the oil and filter again, inspect the oil and oil filter for any foreign particles to ensure that the engine is functioning properly.


    GM Warranty Form

    • Chevrolet Performance Crate Engines includes a 24-month or 50,000-mile limited warranty

    19421057K2 supersedes 19370414K2

    • Power Your Project with CARB-certified GM LS Performance!

      Chevrolet Performance LS3 E-ROD powertrain system will enable enthusiasts to build a vehicle that complies with emissions law while providing modern-day performance and efficiency. This E-ROD System is certified by California Air Resources Board (CARB EO #D-126-32), which permits its installation into classic cars and trucks that predate onboard OBD-II emissions diagnostics. This 6.2L LS3 engine delivers 430 horsepower just like it's found in a C6 Corvette with a refinement that is rare in the world of high performance.

      Show More

      Connect and Cruise Kits

      Chevrolet Performance continues to lead the industry with its unprecedented Connect & Cruise crate powertrain systems - factory-engineered engine and transmission combinations. Chevy Performance engineers matched the engines and transmissions for optimal performance and durability, so you can wring out every horsepower from them with total confidence. The specially calibrated controllers are designed for retrofit installations in older vehicles, for easier and quicker installation and operation without the need for third-party tuning. Each kit delivers a brand-new, fully assembled crate engine, an electronically controlled overdrive transmission, electronic control modules for both, and the engine control hardware to get it all running in your project vehicle. The convenience of a crate engine, the assurance of factory validated performance, and the value of an inclusive package - that's what you get with Chevrolet Performance's Connect & Cruise crate powertrain systems. Detailed instructions outline all the necessary steps. The engineers did all the hard work of designing and calibrating perfectly matched powertrain systems - and they covered them with a 24-month/50,000-mile limited warranty.

      The Chevrolet Performance E-ROD LS3 6.2L 430HP Crate Engine offers the perfect balance of high-performance power and modern emissions compliance. Designed specifically for hot rod and restomod enthusiasts in emissions-controlled states, the E-ROD LS3 brings legendary LS power in a package that's 50-state legal and ready for the road.

      Producing a stout 430 horsepower and 424 lb-ft of torque, this engine delivers crisp throttle response and smooth drivability thanks to its proven aluminum block, high-flow heads, and hydraulic roller camshaft. Whether you're building a street cruiser or a weekend track machine, the 6.2 LS motor offers reliable, modern power without sacrificing performance.

      What sets the LS3 EROD apart is its complete system approach. It includes a specially calibrated ECM, wiring harness, oxygen sensors, MAF sensor, catalytic converters, and more—everything you need to meet emissions requirements while simplifying your swap. It's engineered to deliver a factory-quality driving experience in a custom build.

      Looking for an LS3 engine and transmission combo to modernize your classic? Pairing the E-ROD LS3 with a GM automatic or manual transmission delivers unmatched performance and seamless integration, taking your project to the next level.

      For builders who want horsepower with responsibility, the E-ROD LS3 is the smart solution. With OEM quality, plug-and-play simplicity, and emissions compliance, it's the ideal choice for enthusiasts who demand performance without compromise. Take your build further—clean, powerful, and road-ready with Chevrolet Performance.

    Part TypeEngine and Transmission Package
    Product LineChevrolet Performance E-ROD LS3 6.2L 430HP Crate Engine
    BrandCHEVROLET PERFORMANCE
    Part CategoryPerformance Parts
    Engine TypeHigh-Performance Crate Engine
    Cylinder Head MaterialAluminum
    Engine Block MaterialAluminum
    QuantitySold as a Kit
    Part FitmentSemi Universal
    Engine Displacement6.2L
    Engine Make/SizeGM Gen III/IV LS
    Package Qty1
    Package TypeEA
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning