Chemical Guys V4 All In One Polish and Sealant 16 oz
857-GAP-106-16
V4 All in One Polish cuts away light imperfections, scratches, and swirls, finishes like a fine polish, restores lustrous shine and deep reflection, then adds a layer of protection in just one step.
Use This Polish To:
- Produce exceptional shine in no time
- Protect your paint with premium sealants
- Add durable protection against the elements
- Save time by polishing and sealing at once
- Cut hard and refine the finish in one easy step
Polish And Correct Paint In Less Time
Full polishing jobs can take countless hours. With V4, an entire car can be polished in a few hours in just one pass. For cars with light to moderate swirl marks, scratches, and defects, V4 is the perfect polish that compounds and finishes in one step. The diminishing abrasives cut fast to remove swirls, scratches, and oxidation, then finish like a fine polish to create a wet mirror finish!
Polish + Shine + Seal
A newly polished surface needs to be protected, which is why V4 lays down a layer of sealant with every pass of your DA or rotary machine. V4 adds synthetic sealant technology to seal and protect the surface from contamination, UV rays, bird droppings, insects, and water spots. Full polishing detail jobs can take countless hours. Use V4 for a mirror finish and durable protection in just one pass!
Dual Action Polisher
- 1. Shake well and apply 4-5 drops to desired pad.
- 2. Prime pad with Pad Conditioner. Dab product out evenly across a 2' x 2' section.
- 3. Turn on the machine on the paint to speed setting 1 to spread the product.
- 4. Increase speed to 5-6 and using moderate pressure, work area in 2-3 passes until the product becomes clear.
- 5. Follow with light pressure to finish.
- 6. Remove residue with a clean microfiber towel.
- 7. Please Note: Always try a test spot before use.
Rotary Polisher
- 1. Shake well and apply 4-5 drops to desired pad.
- 2. Prime pad with Pad Conditioner. Dab product out evenly across a 2' x 2' section.
- 3. Turn on the machine away from the paint to a setting in between 1000-1500 rpms to spread the product.
- 4. Using just the weight of the machine (no pressure) work area in 3-4 passes until the compound becomes clear.
- 5. For the final pass adjust the speed setting to between 1200-1800 rpms.
- 6. Work until optical clarity is achieved.
- 7. Remove residue with a clean microfiber cloth.
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.