Items You Need
Ratings |
---|
Price |
Brand |
Deluxe Dressed w/Pulley Kit
Blueprint Engines BP38318MPFIKB 383 ci. Crate Engine:
- 436 Horsepower/443 ft.lbs. Torque
- 10:1 Compression Ratio
- Multi-port fuel injection system, complete with ECU and full Wiring Harness, has had extensive calibration and development work
- ECU controls ignition timing, fuel, and installs with 3 simple wired connections
- Computer Balanced Rotating Assembly within 2 grams
- Includes a comprehensive, dyno-generated printout showing Horsepower and Torque
Blueprint Engines BP38318MPFIKB 383 ci. Crate Engine Specs:
- Block:
- NEW Blueprint Cast Iron Block
- 4-Bolt Main
- 4 in. Bore
- 1-Piece Rear Main Seal
- Passenger Side Dipstick
- Mechanical Fuel Pump Provision
- Drilled and Tapped for Clutch Linkage
- Rotating Assembly:
- New BluePrint Cast Steel Crankshaft
- 3.750 in. Stroke
- Hypereutectic Pistons
- Forged 5.700 in. Connecting Rods
- Internally Balanced Front-Externally Balanced Rear
- Cylinder Heads:
- BluePrint Aluminum Cylinder Heads H8002K
- 64 cc Chambers
- 2.02 in. Intake/1.60 in. Exhaust Valves
- Cam Specs:
- Hydraulic Roller
- .544 Intake/.555 Exhaust Lift
- 230 Intake/236 Exhaust Duration @ .050
- 110 Degree Lobe Separation
- Ignition Timing:
- Computer Controlled by Blueprint ECU
Blueprint Engines BP38318MPFIKB 383 ci. Crate Engine Also Includes:
- Black Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump
- Multi-Port Fuel Injection w/Required Sensors, Harness
- Self-Learning Electronic Control Unit (ECU)
- Distributor
- Harmonic Balancer
- Single Plane Machined Aluminum Intake Manifold
- Oil Pan
- Timing Cover
- Polished Chrome Valve Covers
- Satin Aluminum Water Pump
- Polished Chrome Blueprint Air Cleaner
- Spark Plugs and Wires
- Thermostat w/Thermostat Housing
Blueprint Engines BP38318MPFIKB 383 ci. Crate Engine Notes:
- Features a true 4 in. bore, which mathematically yields 377 ci. with a 3.75 in. stroke
- Front Accessory Drive does not fit all Corvettes
- Front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. This is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.