All-Pro Off Road Expedition Rear Leaf Springs for Select Toyota Tacoma Trucks
024-AP-306737
Product Q&A
View Now
Items You Need
Rear - Expedition
All-Pro Off Road AP-306737 Expedition Leaf Springs Features:
- Designed to bring together off-road performance with a heavy-duty weight-carrying capacity
- Will provide 3 in. of lift with 400-500 lbs of cargo, If unloaded springs provide 4 in. of lift
- Number of leaves: 6 + 1 overload/rebound
- Double "military" wrap gives more strength to the main leaf
- Torque leaf is an extra half leaf at the top of the pack that increases anti-wrap properties without hurting ride quality
- Diamond-cut leaf ends get rid of stress points that can weaken leafs and lead to failure
- Teflon anti-friction pads between each leaf bring a smoother flex, lessen spring wear, and reduce noise
- Leaf springs are shot-peened after being formed to relieve stress
- Each completed spring pack is pre-cycled to its travel extremity for quality control and to reduce the likelihood of initial sag.
All-Pro Off Road AP-306737 Expedition Leaf Springs Notes:
- 1995-1997 Toyota Tacoma requires relocating new front spring hangars 2 in. forward and the rear shackle hangars 1 in. rearward from their stock configurations.
- After Installing leaf springs, the stock bump stops are no longer sufficient, you will need to purchase and install a set of bump stops that are of sufficient height to prevent the spring from going negative arch.
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.