Advance Adapters 712505 Transmission Adapter, Jeep T-90 3Sp To Ford V8 Kit
050-712505
Product Q&A
View Now
Advance Adapters 712505 Features:
- This adapter plate assembly is used to adapt a Ford Small Block V8 Engine to the Jeep / Scout T-90 3 speed manual transmission. The adapter plate is 2.685 in. in length and is manufactured from 356-T6 heat treated aluminum alloy. Included in the adapter plate kit you will receive an adapter plate, new Ford 4.848 in. bearing retainer, pilot bushing, seal, fastening hardware, and adapter instructions.
- Note: When replacing a 4 cylinder engine, a new T-90 input shaft must be purchased, PN716014 & input bearing retainer from a 6 cylinder. A new cluster gear PN716018) is needed only when replacing a 4 cylinder input shaft that has 16 teeth on the cluster side.
- Note: This adapter plate design kit requires a Ford bell housing.
- Transmission
- The T-90 3 speed transmission has a case length of 8.00 in.. T-90 will be stamped on the case. This transmission was used in various models of Jeep from 1946-72 including military vehicles, Universal Jeeps, utility trucks and Scouts (1961-72). It was used in both 4 & 6 cylinder applications.
- SEAL-T90 / 716706
- .625 PILOT TIP/FORD CRANK BRNZ / 716172
- RETAINER- FORD FRONT BEARING 4.849 / 761019
- S.H.C.S. 5/16 -18 X 1-1/4 black oxide / 723119
- ADAPTER- T90 TO FORD SMALL BLOCK V8 / 711504
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.