Advance Adapters 50-9600 Features:
- This heat treated aluminum alloy adapter is 3.7 in. thick and replicates the stock bottom mount locations from the factory adapter housing. This adapter allows you to mate the GM 6L60 or the 6L90 transmission to the Family of Atlas Transfer Cases. This adapter can also be used for 1997 & up Jeep NP231 and Jeep Dana 300 transfer cases however additional parts including a change of the transfer case input gear will be necessary.
- NOTE: Our 50-9600 adapter is not used as a factory replacement. It does not have the Chevy transfer case rotation pattern.
- Transmission
- GM's new Hydra-Matic 6L80 & 6L90 transmissions are the first of a new family of modular six-speed rear-drive transmissions. The transmissions feature two overdrive gears and a wide, 6.04:1 gear ratio spread to improve performance and fuel economy when compared with conventional four- and five-speed automatic transmissions. With two overdrive gears, engine rpm is reduced by approximately 9 percent at 60 mph - a reduction to about 1,500 rpm. Lower engine rpm can bolster fuel economy because less fuel is used. A lower-rpm cruising speed also enhances smoothness and reduces noise heard in the vehicle's cabin.
- On 2WD transmissions the holes located at 12 and 6 o’clock need to be plugged with factory soft plugs. The output shaft needs to have a seal installed. We offer a kit with these items PN716066.
- ADAPTER- 6L80/6L90 TO ATLAS / 51-9600
- 50-9600 KIT BOLT PACK / 714212
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.