Items You Need
Gasoline V8
ATK Core Return Process
JEGS and ATK appreciate your business and want to ensure that your core return is as smooth as possible.
Please CLICK HERE for ATK Core Return Process
Notes:
- Tinware includes valve covers, oil pan, timing cover
- VIN A, B, E,H, J, K, L, T, V, Y
- Head Cast #: 126, 339, 441, 487, 991, 993
- Block Cast #: 010, 379, 014, 388, 678, 509
- 2 bolt main
- 2 piece rear main seal
- Non-roller cam
- Perimeter bolt valve covers
- Driver side dipstick
Engine Break-In Procedure
Use conventional or break-in oil (non-synthetic) for the first 600 miles of operation. Do not drive for long periods at any single speed, always vary your speed. Do not tow a trailer or put other heavy loads on the vehicle. Check the engine oil and coolant levels daily.
At 600 Miles change the engine oil and filter using conventional (non-synthetic) oil. Check fuel and ignition settings; adjust valves (where applicable).
After the first 5,000 of service synthetic engine oil may be used. Follow your vehicle owner’s manual for service intervals.
Specifications:
does the core have to be a 350??
I have an aftermarket chrome oil pan on my current motor do I have to send it with core or can I keep it?
What is the compression ratio of his engine and what are the cam specs? Finally, approximately what HP will it produce?
Does the core need to be fully assembled with crank, Pistons, heads, etc? Does it need to have valve covers and timing cover also? Mine was tore apart by the machine shop, but I opted not to follow through with the rebuild and am looking to just purchase
What diameter balancer does this need ?
Are the pistons flat tops?
Do t you refurbish or install a new crankshaft and bearings on the remanufactured Engine?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.