Wideband AFR Gauge
AEM's Inline Wideband UEGO controller gives all the benefits of the AEM Wideband Air/Fuel Gauge to those who do not require or want an additional gauge in the car. Perfect for datalogging, engine management systems or racing applications where a gauge is not desired. Simple wiring makes installation easy. The controller is weatherproof and can be mounted anywhere in or outside the vehicle.
The AEM Inline Wideband UEGO is a must for users of engine management systems and data loggers who do not require a gauge to monitor air/fuel ratio. When tuning an engine, accurate Air/Fuel Ratio data is critical. Running rich can cause a loss in power, while running too lean may result in serious engine damage. The Inline UEGO can be easily tied in to almost any engine management system to be used for O2 feedback. The Bosch 4.2LSU sensor, which gives the controller its speed and accuracy, is laboratory calibrated at the factory and never requires free air calibration.
AEM 30-4410 Features:
- No free air calibration required... ever
- Ideal AFR monitoring tool for EFI or carbureted applications, and engine dynamometers
- Does not oscillate AFR reading like narrow band sensors
- Two status lights for error detection and operating status
- No laptop required for monitoring!
- Includes Bosch 4.2 sensor for optimum accuracy and reliability
- Accurate to 0.1 AFR
- 0-5v analog output included for use with data loggers and virtually any engine management system
- Detects AFR sensor problems and outputs error values which can be used to deactivate feedback
- Reads Gasoline values from 8.5 to 18:1 AFR
- Reads E85 values from 5.7 to 12:1 AFR
- Reads Ethanol values from 5.2 to 11:1 AFR
- Reads Methanol values from 3.7 to 7.8: AFR
- Reads Lambda values from 0.58 to 1.22 AFR
Specifications:
Will this AFR gauge work with leaded gas?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.