Items You Need
CV Drive Shaft
Crown RT24002 RT Off-Road Slip Yoke Eliminator Kit Rear Heavy-Duty CV Drive Shaft
The finishing touch when installing a slip yoke eliminator (SYE) Kit is a drive shaft. This CV (constant velocity) drive shaft bolts directly into a 1987-2006 Jeep Wrangler YJ or TJ with the RT25005 SYE kit installed. The shaft comes with attaching bolts for the CV end. Your factory Dana Rear axle pinion yoke u-bolts can be reused for the installation or a new set of u-bolts can be purchased separately. The Dana Axle pinion yokes can have either a u-bolt or strap and bolt style system securing the universal joint to the pinion yoke. We recommend JEGS u-bolt kit 555-60610 or Dana Spicer strap & bolt kit 2-70-18X depending on your application and are sold separately.
Crown RT24002 RT Off-Road Slip Yoke Eliminator Kit Rear Heavy-Duty CV Drive Shaft Dimensions:
- Drive Shaft Functional Lengths:
- Fully Compressed: 16 in., (Measured from the CV mounting flange to the center of the u-joint on the slip yoke end)
- Fully Extended: 18.250 in. (Measured from the CV mounting flange to the center of the u-joint on the slip yoke end)
- 1310 Series U-joints
- Bearing Cap O.D.: 1.062 in.
- Overall Width: 3.218 in.
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.