Advance Adapters 716138 Features:
- This adapter kit is designed to allow the use of a TH350, 700R, 4L60E, TH400 to the Jeep 4.2, 304,360, & 401 AMC V8's. The kit will require a modified flexplate (sold separately) and a GM torque converter.
- The adapter kit includes a precision cut and machined 5/8 in. steel adapter plate, crank bushing, torque converter spacer, dowel parts, fastening hardware and adapter instructions.
- This kit is not for use with 4L60/65/70E originally used with GEN III or GEN IV V8 engines.
- Note: This adapter assembly is not intended for the Jeep 4.0 litre. Please refer to kit PN716138-1.
- Note: The flexplate we offer only fit GM torque converters with 10.75 in. bolt pattern, does not fit TH400 11.50 in. or 4L80E.
- TH350 GM kick down 52 in. PN716138KD1
- 700R GM kick down 52 in. PN716138-KD
- Required Flexplates
- 716138-A 1972-87 AMC 304/360 V8 flexplate
- 716138-C 1988-91 AMC 360 V8
- 716138-D 1972-76 AMC 401 V8
- 716138-E 1972-87 232 / 258 flexplate
- DOWELL BOLT 716138 KIT / 716138-DB
- ADAPTER- AMC BLOCK TO GM TRANS / 716138-PLT
- WASHER FOR ADAP.PLATE-716138 / 716138-W
- GM ENGINE DOWEL PIN / 716123
- BUSHING- AMC CRANK TO TH350/700R4 / 716138-CB
- SPACER- 716138 FLEXPLATE / 716138-CS
- 10mm X 1.5 X 45mm H.H.C.S. GRD 10.9 / 720034
- S.H.C.S. 5/16 -18 X 1-1/4 black oxide / 723119
- LOCK WASHER 5/16 PLATED / 723103
- LOCK WASHER 3/8 ZINC / 723704
- 5/16 FLAT WASHER SAE ZINC / 723122
- BOLT 3/8 -16 X 1.00 in. SHCS ZINC / 723731
- H.H.C.S. 3/8 -16 X 1-1/4 (GR5) zinc / 723722
- 3/8 -16 X 1-3/4 H.H.C.S. GRD8 BOLT / 723763
Advance Adapters 716138 Fitment Notes:
- 1958-1965 GM 4L60E L6
- 1964-1979 GM 4L60E L6
- 1965-1970 GM 4L60E L6
- 1971-1988 GM 4L60E L6
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.