Ratings |
---|
Price |
Brand |
EFI Self-Tuning Kits
Sniper EFI 2 x 4 Self-Tuning Kit Features:
Bolt-on, self-tuning EFI conversion kit
Fits on dual intake manifolds with flange spacing as close as 6.4375 in. center-to-center
Supports up to 1250 HP with (8) 100 lb/hr fuel injectors
3.500 in. Color touchscreen for initial setup, tuning, and gauge display
Calibration wizard program creates a base map, then starts tuning on its own
USB-to-CAN cable included for laptop tuning (if desired)
Throttle body mounted ECU
Internal MAP Sensor
Integrated ignition timing control and single stage progressive nitrous control
OEM style throttle positioning sensor (TPS), idle air control (IAC)
(4) Wiring connections required (battery +/- , ignition, RPM)
(3) Programmable 0-5V sensor inputs
(1) Sensor ground
Installation Notes:
This EFI system will require an external fuel pressure regulator. Use p/n: 510-12-848 for up to 800 hp and p/n 510-12-851 for 1000+ hp.
Note:
Sniper EFI units displayed on intake manifolds and/or superchargers are for visual reference only and are not included with purchase.
Specifications:
Will it fit on a 350 Chevy
Would it mount a 5.7 Vortec block?
Will this work with methanol
Is this compatible with 351 Windsor?
Is this a supercharged EFI system and do you need an air filter or hood scoop over the carbs
Can this be used with e85
Hello, how much fuel pressure is needed for the super sniper 2 x 4 kit
Will it fit a 460 BBF
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.